Tr!ple
This is a 3-button foot switch designed to function exactly like much, much larger stock TRS controllers. It was meant to control either the Rubberneck™ or the Drag™, but it will also control other compatible passive TRS pedals. The laser-etched graphics on the Tr!ple are inspired by Art Deco wallpaper patterns. The Tr!ple has 1/4” and 1/8” TRS outputs in parallel so you can choose which size cable you want to use.
Tr!ple L
This is the same as the Tr!ple described above except in one very important aspect. The marked foot switch that controls the delay oscillation on the Rubberneck™ is Latching. This has both positive and negative aspects. When this switch is engaged the Rubberneck™ goes into oscillation and stays in oscillation until the switch is pressed again. When the oscillation controls on the Rubberneck™ are balanced properly you can conjure up live repeating loop-like oscillations without having to keep your foot on the switch. Due to the nature of a latching switch in this configuration, once it is engaged all the other switches on the Tr!ple are defeated, and there is no tap tempo function available with this option.* But you can still control Rubbernecking™ and tap-tempo from the face of the Rubberneck™ itself. Another negative is that this version of the Tr!ple will likely not work with anything other than the Rubberneck™. I told you this stuff is niche!
*Because there are some compromises with the latching configuration, if you order I will likely email you to confirm that you are aware of the compromises and are willing to proceed.
Dimensions: 3.64" x 1.52" x 1.22" approximately 92.5 mm x 38.5 mm x 31 mm
